structural-fasteners

19 Oct, 26

Laser welding vs TIG vs MIG: which one actually fits your work

Comparing laser welding vs TIG and MIG comes down mostly to thickness. Handheld fiber laser welding fits thin stainless steel, carbon steel and aluminium, roughly 0.5 to 4 mm, where distortion and grinding are eating your time. MIG is still the better process for thick structural sections and joints with poor fit-up. TIG remains the […]

12 Oct, 26

Laser cleaning vs sandblasting: an honest comparison for metal surfaces

Laser cleaning vs sandblasting is not a contest one side wins every time. Laser cleaning removes rust, paint and oil with no abrasive media, no spent grit and very little effect on the metal underneath, which makes it the better choice for weld prep, moulds, in-plant maintenance and parts you want to keep. Sandblasting is […]

Hex bolt heads stamped 8.8, 10.9 and 12.9 property class markings

05 Oct, 26

Bolt grades 8.8 vs 10.9 vs 12.9: what the numbers on the head mean

Bolt grades are the two numbers stamped on the head of a metric bolt, and together they tell you how strong it is. Multiply the first number by 100 to get the nominal tensile strength in MPa. The second number tells you what fraction of that the bolt can carry before it starts to stretch […]

28 Sep, 26

Fasteners and gaskets: how flange bolting actually works

Fasteners and gaskets: how flange bolting actually works Stud bolts and gaskets are one system. The gasket type decides how much bolt load the joint needs, and the bolt load decides whether the gasket seals. Buy them as a matched set with the coating and lubrication specified, or you get joints that leak at commissioning […]

21 Sep, 26

DIN 931 vs DIN 933 vs DIN 934: what actually changes between them

DIN 931 vs DIN 933 vs DIN 934: what actually changes between them DIN 931 is a hex bolt with a partial thread. DIN 933 is the same bolt threaded along its whole length. DIN 934 is not a bolt at all, it is the hex nut that pairs with both. If the joint carries […]

14 Sep, 26

Drawn arc vs CD stud welding: which process fits your job

Drawn arc vs CD stud welding: which process fits your job Use drawn arc for studs from about 8 mm upward on plate 2 mm and thicker, where weld strength matters more than appearance. Use capacitor discharge for studs up to about 10 mm on thin sheet where the back face has to stay unmarked. […]

07 Sep, 26

Welding machine rental vs buying in the UAE: how to actually decide

Welding machine rental vs buying in the UAE: how to actually decide Rent if you will use the machine fewer than about 90 working days a year. Buy if you will use it more than that and you have somewhere to store and service it. Below that threshold the rental cost stays under what ownership […]

27 Aug, 26

Industrial Fasteners Supplier in UAE: Quality Solutions for Industrial Applications

Industrial projects depend on thousands of mechanical connections. From structural steel and heavy machinery to manufacturing equipment and infrastructure, the fasteners used in these applications need to be selected according to the loads, environment and specifications of the project. This makes choosing the right industrial fasteners in UAE an important part of industrial procurement. Bolts, […]

20 Aug, 26

How to Choose a Reliable Global Arc Stud Welding Supplier

Stud welding is widely used in structural steel fabrication and other industrial applications where studs need to be attached efficiently to metal surfaces. For heavy-duty applications, ARC stud welding provides a practical method of joining studs to steel components. It is particularly relevant to structural applications involving shear studs, threaded studs and other welded fasteners. […]

13 Aug, 26

Sinoars Shear Studs Supplier for Structural Steel & Composite Construction

Composite construction requires reliable connections between structural steel and concrete. Shear studs are an important component of these systems because they help transfer forces between the two materials. For contractors, steel fabricators and infrastructure companies, choosing the right shear stud supplier is therefore an important part of project planning. Global Fasteners is an authorized Sinoars […]

Laser welding vs TIG vs MIG: which one actually fits your work

Laser cleaning vs sandblasting: an honest comparison for metal surfaces

Bolt grades 8.8 vs 10.9 vs 12.9: what the numbers on the head mean

Fasteners and gaskets: how flange bolting actually works

DIN 931 vs DIN 933 vs DIN 934: what actually changes between them

Drawn arc vs CD stud welding: which process fits your job

Welding machine rental vs buying in the UAE: how to actually decide

Industrial Fasteners Supplier in UAE: Quality Solutions for Industrial Applications

How to Choose a Reliable Global Arc Stud Welding Supplier

Sinoars Shear Studs Supplier for Structural Steel & Composite Construction

Laser welding vs TIG vs MIG: which one actually fits your work

Laser cleaning vs sandblasting: an honest comparison for metal surfaces

Bolt grades 8.8 vs 10.9 vs 12.9: what the numbers on the head mean

Industrial Fasteners Saudi Arabia

Index

Official info:

Working Hours